The E-flite Turbo Timber Evolution 1.5m PNP with floats (manufacturer ID: EFL105275B) is an advanced RC flight model that is characterized by its performance, versatility and longevity. Thanks to its numerous improvements to the previous models and the additional equipment with swimmers, this aircraft offers particularly ambitious model pilots a fascinating and flexible flight experience. The following guide provides practical and comprehensive answers to all questions from buyers, illuminates test results and user experiences and gives numerous tips about technology, accessories and operation.
Characteristics | Value |
---|---|
Range | 1.555 mm |
Length | 1.040 mm |
Weight | ca. 1,530 – 1,700 g |
Control functions | Rear, Side Rudder, Cross Rudder, Motor, Doors (LK) |
Engine | Brushless external rotor, 3S-4S compatible |
Controller | Range Avian 70A Smart Lite ESC |
Servos | 6x Spectrum Metal Gear Servos (installed) |
Material | EPO rigid foam |
Battery recommendation | 3–4S, 2200–5000mAh LiPo |
Special features | STOL properties, float (included), robust suspension suspension, telemetry, thrust reversal |
Scope | Aircraft with floats, without receiver/accu/charger (PNP version) |
General mood: The response of the community is mostly positive. Many users feel that the model is reliable, suitable for everyday use and easy-to-release – even for advanced pilots looking for a versatile all-rounder. The high flight stability and the STOL capabilities (Short Take Off and Landing) are particularly praised, which also allow start-ups and landings in small spaces.
Praise points from experience reports:
Critical points or challenges according to reviews:
In summary: The aircraft convinces with high versatility and an enormous number of flight characteristics, which also inspire experienced model builders.
Tests of technical journals and experienced pilots certify the “Evolution” in comparison with previous ones a further increased flight performance. Particular emphasis is placed on:
Many test pilots expressly recommend the model for the transport of small payloads (e.g. parachute jump) or as tractors for sailplanes with suitable equipment.
The aircraft consists almost entirely of high-density EPO foam. This material has several advantages:
Especially in the case of models that are also used on rough airfields or with floats, the EPO construction is a clear practical advantage.
Flight times:
With recommended batteries (3S/4S, 3,200 to 5,000 mAh), flight times of 6 to 12 minutes are realistic in practice depending on the flight style. Those who travel a lot with full gas and art flight are coming to 6-7 minutes, while fast, energy-efficient flying allows longer intervals.
Ascending power:
With a 4S battery, the brushless drive delivers an impressive climbing performance – vertical climbing flights are no problem, short starting distances below 2 meters are realistic. Even with a 3S battery, the performance remains absolutely sufficient for all common flight maneuvers.
The surfaces are removable without tools and the height guide can be easily disassembled. In the assembled state, the model fits into larger limousines or combinations, for transport to the water flight point it is recommended to dismantle the two main wings. Thanks to the sturdy foam, the hull also holds the transport in the trunk without a special pocket.
For the Turbo Timber Evolution 1.5m, virtually all components are available as spare parts – from chassis and floats to propellers and spiders to surfaces, hulls and guides. In addition, the accessories are freely selectable: Various battery sizes, propellers, wheels and recommended smart electronics ensure flexible adaptability and ease of repair.
The Turbo Timber Evolution 1.5m PNP with floats is aimed at:
The PNP character (Plug and Play) must be used to select and install receivers and transmitters themselves. For absolute beginners, the BNF-Basic model with already integrated receiver and entry aids is recommended.
Installation time:
Experience has shown that the final assembly takes between 45 and 90 minutes, depending on the experience and care of cabling the electronics. Preassembled delivery (PNP) ensures that no soldering work is required.
Instruction:
The manual is extensively illustrated and available in several languages. Imaging and step-by-step explanations also lead technically less routined users safely through the setup.
Tip: The exact alignment of receivers and the calibration of the control surfaces should take place particularly carefully in order to exploit the full performance.
The community around the Timber series is active worldwide. Tips, spare parts information and tuning ideas are shared in forums and social media. German and international user groups offer newcomers and professionals fast exchanges, helpful problem solutions and expert reports. Regular pilot meetings and online events ensure coherence and mutual support.
Some of the best known alternatives to E-flite Turbo Timber Evolution 1.5m PNP with floats can be compared in the following table:
Model | Range | Material | STOL capability | float incl. | Price range |
---|---|---|---|---|---|
E-flite Turbo Timber Evolution 1.5m | 1.555 mm | EPO foam | Yes | Yes | Medium |
FMS Kingfisher 1400mm | 1,400 mm | EPO foam | Yes | Optional | Approval |
Multiplex FunCub NG | 1.410 mm | elapor | Yes | Optional | Medium |
HobbyZone Carbon Cub S2 | 1,300 mm | EPO foam | Yes | Optional | Beginners |
Durafly Tundra V2 | 1,300 mm | EPO foam | Yes | Optional | Approval |
In a direct comparison, the Timber model convinces with the robust 70A controller, the increased charge, particularly far-reaching telemetry and real thrust reversal. Many alternatives offer either a smaller span, less power or no standard floats.
In the segment of high-quality, versatile STOL aircraft, the Turbo Timber Evolution offers an excellent balance of investment and value:
1. Does the model also fit for beginners?
With some pre-experience and when using a stabilising receiver yes. For complete newcomers, the BNF model with SAFE is more recommended.
Two. Can the model also start on snow?
Yes, with mounted floats, the model can start and land on snow as on water.
3. What to do with damage to the hull?
EPO can be easily and stablely repaired with suitable second adhesive or special foam adhesive. Single spare parts are easy to get.
4. Which settings are recommended for a quiet first flight?
Reduced rudder beats (dual rate) and moderate flap position help to know. The instructions provide exact values.
Five. How is the change on floats?
The main suspension is simply unscrewed, the floats are mounted with few handles. The instructions show the steps in detail.
6. My receiver does not give a signal to telemetry – what to do?
Only compatible smart receivers support full telemetry. Check the compatibility list and update the recipient if necessary.
The E-flite Turbo Timber Evolution 1.5m PNP with floats sets new standards in the field of sporty all-round STOL models. It convinces with robust design, excellent flight performance, practical equipment and high-quality versatility. Thanks to the extensive spare parts supply, the strong community and the enormous practical value, the model is a rewarding investment for those who are looking for fun at the versatile RC sports – whether on the airfield, lakes or in the snow.
If you are looking for an equally flexible and sturdy RC aircraft that is thrilled every day, you will enjoy the Turbo Timber Evolution.
Plug-N-Play | |
3S,4S | |
Yes | |
EPO | |
Elektrisch | |
40.9" (1039 mm) | |
54 - 60oz (1.53 - 1.7kg) | |
559.5 sq in (36.1 sq dm) | |
61" (1549 mm) |