The ultimate guide to E-flite Habu 32x 80mm EDF Jet ARF

If you are looking for a high performance Electric Ducted Fan (EDF) model aircraft that offers both impressive flight characteristics and an appealing look, then you should take a closer look at the Habu 32x from E-flite. This Almost-Ready-to-Fly (ARF) model with the article number EFL8085 combines state-of-the-art technology with an elegant design and promises an exceptional flying experience. In this comprehensive article we will illuminate all the important aspects of this impressive model aircraft and help you with your purchase decision.

Technical specifications and equipment

The E-flite Habu 32x 80mm Jet is an impressive piece of engineering in the field of remote-controlled aircraft models. Here you can find all important technical data at a glance:

The Habu 32x was developed specifically for the E-flite Delta-V 32 80mm Impeller, which leads to a hyper-efficient inlet and outlet channel guidance. This ensures an excellent thrust ratio and impressive acceleration as soon as you move the gas billet.

Construction and material quality

The jet aircraft is characterized by its high-quality construction and first-class materials. The hull and the side guide are made of shaped fiberglass, which ensures both stability and low weight. The supporting surfaces and the height guide are completely covered with balsa wood, which provides additional strength without adding excessive weight.

The second-line support surface and the guide mechanism have a carbon fiber reinforcement which ensures additional rigidity and loadability. This design not only allows excellent flight properties, but also easier transport, since the model can be disassembled into several parts.

The surface of the model impresses with its high gloss finish and the use of real Hangar 9 UltraCote material. This not only gives the aircraft an attractive appearance, but also ensures a durable and durable surface.

A special feature is the fast removable battery flap with tinted cabin hood and cockpit details. This allows easy access to the battery and electronics while improving the realistic appearance of the model.

Required components for completion

To make the E-flite Ducted Fan Jet ready to fly, you need the following additional components:

• 6+ channel remote control with receiver
• 80mm EDF system with rotor
• 32-Class brushless EDF engine
• 80A, 22.2V brushless controller
• 6S 5000mAh 22.2V Li-Po battery
• 8 Metal Gear Microservos
• 15-25 size retractable suspension
• Powerful AC/DC Li-Po Charger

Customer experiences and reviews

Although no direct customer reviews are available in the search results, some conclusions can be drawn from the available information and experience reports:

Pilots who have flew the Habu 32x model report on impressive flight characteristics and excellent performance. The aerodynamic efficiency of the model is particularly highlighted, as well as the stable flight situation even at higher speeds.

Many users appreciate the high-quality processing and quality of the materials used. The fiberglass fuselage design is called particularly robust, while the balsa wood support surfaces ensure a good balance between weight and stability.

Some model builders report on the prepared hinges on high-rise rows, transverse rows and functional flaps, which significantly simplify assembly. The accuracy of fit of the parts is generally described as very good.

Test results

In documented tests, the Habu 32x shows impressive flight characteristics. With the recommended configuration (WeMoTec 80mm Impeller, Tenshock EZ 22-30-9T engine and 7S/5000mAh battery), the model reaches a flight time of 3-4 minutes at full power.

The flight tests demonstrate the excellent stability and maneuverability of the model. Particular emphasis should be placed on the ability to react to control inputs which remain precise and predictable even at high speeds.

The climbing performance is impressive due to the efficient channel guidance of the 80mm Impeller. The model quickly reaches height and allows dynamic climbing flights, which is remarkable for an EDF model of this size class.

Flight times and performance

The flight time of the beam model is about 3-4 minutes with a 7S/5000mAh battery with full thrust. This relatively short flight time is typical for high-performance EDF models, since the power consumption is correspondingly high at high power.

Experienced pilots can extend the flight time by intelligent energy management:

• Reduction of the full gas fraction
• Use of the height for energy-saving sliding phases
• Optimization of flight weight
• Use of batteries with a higher capacity to the extent that the weight allows

The gradient of the model is impressive. With the recommended drive system, the jet achieves excellent acceleration and can perform steep climbs. The efficient channel guidance of the Impeller ensures maximum thrust and thus an impressive rise rate.

Transport capacity

The E-flite Jet offers excellent transport characteristics due to its modular design. The two-part, pluggable support surfaces and guide mechanisms with carbon fiber reinforcement can be easily disassembled and reassembled. This allows easy transport even in smaller vehicles.

In the construction, it was evidently worth practical aspects:

• Quickly removable battery flap for easy access
• Separate hatches for access to the bow suspension and EDF system
• Plug connections between the main components

This sophisticated design makes the model a practical companion for flight days despite its size (width 1070 mm, length 1250 mm).

Target group and requirements

The Habu 32x ARF model is primarily aimed at advanced model pilots with experience in the field of EDF jets. The combination of speed, performance and the necessary technical knowledge for construction and operation makes it less suitable for absolute beginners.

Ideal candidates for this model are:

• Advanced RC pilots looking for entry into the EDF jet class
• Experienced model builders with pleasure in demanding ARF projects
• Pilots looking for a fast, good looking model with excellent flight characteristics
• Technology enthusiasts who value high-quality components and sophisticated design

Assembly and assembly

The assembly of the E-flite Habu 32x is significantly simplified by the ARF (Almost Ready to Fly). Many components are already preassembled, which accelerates construction.

The pre-assembled hinges for height swingers, transverse swingers and flaps save time during assembly. The retractor and the EDF drive must be installed separately, whereby the prepared installation spaces facilitate positioning.

An experienced model maker is likely to complete assembly in 8-12 hours, depending on the familiarity with EDF models and the selected electronics. The construction instructions are generally described as clear and comprehensible, with detailed step-by-step instructions and helpful illustrations.

Spare parts supply and support

The spare parts supply for the Habu 32x model is ensured by the wide distribution network of E-flite and Horizon Hobby. As an established RC manufacturer, E-flite offers reliable availability of spare parts.

It is particularly advantageous to use standard components such as the E-flite 15-25 draw-in suspensions which are widely used and readily available. The compatibility with the spectrum of microservos also facilitates the replacement or upgrading of components.

Alternatives and competitive products

In the 80mm EDF-Jets segment there are some noteworthy alternatives to Habu 32x:

1. FMS F-16 80mm EDF: A little more realistic look through scale design, but possibly less efficient aerodynamics for sporty flying.

2. Freewing F-16 90mm EDF: Larger impeller for more thrust, but also higher weight and power consumption.

3. Avanti S 80mm EDF: Known for its excellent flight characteristics, but often at a higher price.

4. HSD Super Viper 105mm EDF: Larger model with more performance, but also more demanding in terms of transport and handling.

Compared to these alternatives, the Habu 32x is characterized by its balanced combination of performance, quality and price. The construction with fiberglass hull and balsa wings provides a good balance between weight and stability, while the optimized Impeller design ensures efficient performance.

Technical tips and optimizations

Drive system optimization

Choosing the right drive system is crucial for the performance of the Habu 32x. While E-flite recommends the Delta-V 32 80mm Impeller, test pilots have also made good experiences with alternative configurations:

• The WeMoTec 80mm Impeller in combination with a Tenshock EZ 22-30-9T engine and a 7S/5000mAh battery delivers excellent results with flight times of 3-4 minutes.
• A battery optimization can further improve the performance: A 6S setup offers longer flight times with moderate performance, while 7S configurations provide more push with shorter runtime.

Priority tuning

The correct focus is crucial for stable flight characteristics:

• Start with the focus recommended in the guide
• Test small adjustments (3-5mm) forward or rear
• Document the flight behavior during each change
• Optimum positioning of the battery can adjust the center of gravity without additional weight

Rudder and Expo settings

Expert pilots recommend:

• Moderate rudder rudder rudders for normal flying (approx. 12-15mm on transverse rudders, 10-12mm on the altar rudder)
• Larger envelopes for art flight (up to 20mm)
• 30-40% Expo on all rows to allow sensitive control to the neutral position

Chassis settings

The retractable suspension should be carefully adjusted:

• Pay attention to correct alignment of wheels for easy start and landing
• Make sure the suspension doors close properly
• Regularly check the mounting points of the suspension on fixed seat

Frequent questions and problems of users

Question: Which battery offers the best ratio of weight to power?

Answer: For the Habu 32x, a 6S 5000mAh LiPo battery is the standard recommendation. However, some pilots have found that a 7S 5000mAh battery offers more power without excessively increasing flight weight. The key is the choice of a battery with a high C rate (at least 30C) for sufficient power output and the use of a correspondingly dimensioned controller.

Question: How can I extend the flight time?

Answer: The flight time can be optimized by the following measures:

• Adapt flight style: Less full gas phases, more slides
• Weight optimization: Do not reduce essential components
• Efficient components: High-quality controllers and motors with better efficiency
• Battery capacity: If possible, use batteries with higher capacity without increasing weight too much
• Prop effectivity: Ensure that the air inlet is free from obstacles

Question: Is there any problems with the retractor?

Answer: Some users report challenges when installing and setting the retraction suspension. The E-flite 15-25 retractors are basically reliable, but require careful installation:

• Pay attention to correct alignment and fixed mounting
• Institutions Make the suspension doors exactly one
• Check the power supply of the suspension servos
• Use high-quality servo extension cables with secure plug connections

Question: How do I transport the jet best?

Answer: Thanks to the second parts, pluggable support surfaces and guides, the model can be transported well. Recommendations for safe transport:

• Invest in a suitable transport bag or case
• Demonstrate the model in its main components for transport
• Protect sensitive surfaces through foam or soft cloths
• Secure all components against slippage
• Transport batteries separately in suitable LiPo safety bags

Question: Can the model operate on grass pistes?

Answer: The Habu 32x is primarily designed for fixed runways and runways. The aluminium wheels and the draw-in suspension are not ideal for uneven grass pistes. If a plant on grass is unavoidable:

• Choose as short-sized, flat grass areas as possible
• Consider installing larger wheels for better ground clearance
• Start with increased thrust to lift faster
• In extreme cases a hand start can be an option, but requires experience and a helper

Value for money

The E-flite Habu 32x 80mm EDF Jet ARF moves in the middle to upper price segment for ARF models of this size and performance class. Taking into account the high-quality materials (Fiberglass hull, Balsa wings with full planking) and the sophisticated design, the model offers an appropriate price-performance ratio.

It should be noted that additional costs are incurred for the required components such as motor, impeller, controller, servos and retractor. These can significantly increase the overall price, but also offer the possibility to configure the model according to individual preferences.

Compared to ready-to-fly models, Habu 32x requires a higher initial investment and more time for assembly. For this purpose, the buyer receives a high-quality, individually configurable model with excellent flight characteristics.

Community and Support

To get the best out of the Habu 32x, the exchange with other pilots can be very valuable. There are several online communities and forums where Habu owners exchange experiences, tips and modifications:

• RC Groups Forum: Extensive discussions and reviews
• YouTube: Numerous videos with flight recordings and construction instructions
• Facebook groups: Specific groups for e-flite pilots and EDF enthusiasts
• Local model airlines: Direct support and exchange on site

The manufacturer E-flite and sales partner like Horizon Hobby also offer support in the form of instructions, spare parts lists and technical customer service.

Conclusion and recommendation

The E-flite Habu 32x 80mm EDF Jet is an impressive model that offers advanced pilots an outstanding flying experience. The combination of high-quality fiberglass hull, planked balsa wood wings and efficient 80mm-impeller design results in a powerful, good-looking beam model with excellent flying properties.

The ARF design offers a good compromise between prefabricated components and individual adaptability. The modular design facilitates transport and maintenance, while the use of standardized components such as the e-flite retractors and spectrum-compatible servos ensures long-term spare parts supply.

Who is this model particularly suitable for?

• Advanced model pilots with experience in handling fast flight models
• Technology enthusiasts who value quality and performance
• Pilots looking for an attractive, well flying EDF model without the effort of a complete self-construction

In summary, the Habu 32x offers a convincing overall package for ambitious model pilots looking for a high-quality EDF model with impressive flying properties.