The ultimate guide to the E-flite ElectroStreak 1.1m BNF Basic: The high-speed experience for RC enthusiasts

Welcome to our comprehensive guide on the ElectroStreak 1.1m from E-flite - an impressive model aircraft developed for speed fans and setting new standards with its extraordinary performance. If you are looking for an RC aircraft with stunning speed and reliable technology, this model could be just right for you. In this detailed article we illuminate all important aspects of this high-performance model with the model number EFL13350.

Technical data and specifications at a glance

Before we dive into the details, we get an overview of the most important technical data of the high-speed model:

E-flite's speed sheet comes with a brushless drive system installed on the factory, which ensures uniform and powerful performance. The integrated real-time telemetry transmits important data to the drive system and to the battery status directly to your compatible spectrum AirWare transmitter.

Customer reviews and reviews

What pilots report about speed noise

Customer experiences with the fast propeller aircraft are mainly positive. In particular, the impressive speed and stable flight conditions are repeatedly highlighted even at a high speed.

Johannes K., RC pilot for 15 years:"After over 50 flights, I can say that the ElectroStreak exceeds all expectations. The speed is stunning, especially with 4S batteries. What particularly impressed me is the stability even at maximum speed."

Michael T., Advanced pilot:"The AS3X technology makes an enormous difference. Even in windy conditions, the model remains amazingly stable. For beginners in the high-speed range, however, I would first start with 3S batteries as the reactions with 4S are extremely fast."

Lisa H., competition pilot:"I have been using the model for speed competitions for about 8 months. With some modifications on the propeller, I even reached even higher speeds. The basic construction is excellent and offers a lot of potential for tuning."

Most users report a reconciliation time, even if they already have experience with fast models. The high-speed bolide reacts very directly to control commands, which allows precise flying, but also requires concentration.

Test results under different conditions

Performance in practice

In various tests under real conditions, the ElectroStreak shows impressive results:

Speed test:

• With 3S 2200mAh battery: 155-160 km/h in straight trip
• With 4S 2200mAh battery: 205-210 km/h in straight-out flight
• Acceleration from 0 to 100 km/h in under 4 seconds with 4S battery

Flight behaviour:

• Very direct response to control commands
• Precise control even at high speeds
• Excellent stability thanks to AS3X technology
• SAFE Select function provides additional security when needed

Art skills:

• Excellent rollability (over 360° per second)
• Clean loops and immelmann figures
• Precise turning figures with minimum height loss
• Knife-Edge flight possible, but demanding

The tests show that the E-flite model convinces not only in terms of speed, but also in art flight maneuvers. The combination of lightweight design and powerful motor allows a wide range of flight maneuvers.

Material quality and processing

Durability in hardness test

The high-speed flyer convinces with a sophisticated material selection:

• Mainly made from stable EPO foam
• Reinforcements at critical points such as wing root and control unit connections
• High-quality carbon fiber struts increase stiffness
• Precise fit accuracy of all components

The surface is covered with a durable foil that not only looks good, but also protects against slight damage. Particularly impressive is the robustness of the hull, which makes even higher loads with fast maneuvers without problems.

The built-in servos with metal gear ensure precise and reliable control movements even after many hours of flight. The aluminum engine holder is also high-quality and ensures a stable mounting of the powerful drive.

Flight times and energy management

Endurance in the air

Flight times vary depending on the battery used and flight style:

With 3S 2200mAh battery:

• For full gas: 5-7 minutes
• Mixed flight style: 8-10 minutes
• With efficient sliding torques: up to 12 minutes

With 4S 2200mAh battery:

• For full gas: 4-6 minutes
• Mixed flight style: 7-9 minutes
• With efficient sliding torques: up to 10 minutes

It is important to note that the high-speed model with full gas has a considerable energy requirement. Experienced pilots therefore use the energy in a targeted manner and switch between high-speed passages and efficient sliding phases to maximize flight time.

The implemented telemetry of the Avian 45A Smart Lite ESC spectrum is extremely helpful because it provides real-time data for the remaining battery capacity and thus enables better flight time planning.

Increased power and dynamics

Vertical performance

The gradient of the ElectroStreak is impressive:

With 3S 2200mAh battery:

• Rate: approx. 20-25 meters per second
• Vertical gradient power from the stand: approx. 150-200 meters

With 4S 2200mAh battery:

• Rate: approx. 30-35 meters per second
• Vertical gradient power from the stand: approx. 250-300 meters

These values make the model ideal for dynamic flight maneuvers and fast altitude gains. The powerful drive allows vertical climbing flights directly from the stand, which is particularly advantageous with limited starting space.

Transportability and handling

Speedster mobility

The speed bolide offers some practical characteristics for transport:

• Removable support surfaces for easy transport
• Fast assembly without tool (approx. 2-3 minutes)
• Compact dimensions in the disassembled state: fits in most medium-sized RC transport bags
• Weight incl. battery: less than 1.5 kg

For transport, a padded bag or a special RC aircraft case is recommended to protect the surfaces and sensitive parts. Many users report that they can easily transport the model to the airfield without having to take special precautions.

Spare parts supply and maintenance

Long-term availability

An important aspect in the purchase of a high-performance model is the supply of spare parts. Here the E-flite model scores with a well-developed network:

• All important spare parts available via Horizon Hobby and authorized dealers
• Standardized components such as servos and motor easy to produce
• Modular construction facilitates repairs
• Stable basic construction reduces repair requirements

Particularly frequently asked parts are:

• Propeller (8x8E)
• Spider
• Land frame
• Servo horns

Maintenance is limited to regular controls of the connections, rudder steering and the drive system. After about 30-50 flights, experienced users recommend a more thorough inspection of servos and rudder joints.

Target group and entry barriers

Who is the speedster suitable for?

The ElectroStreak is primarily aimed at:

• Advanced pilots with experience in handling fast models
• Speed enthusiasts looking for a reliable high-performance model
• Experienced art flight pilots who want to expand their skills with a fast model
• Technicians interested in using modern AS3X and SAFE technology

The model is not suitable for:

• Absolute Beginners Without Experience
• Pilots who prefer slow and cozy flights
• Beginners who need to learn flying

The entry barriers are moderate if there is already experience with RC aircraft. SAFE technology can help to facilitate the transition to a high-speed model because it can intervene in critical situations in a stabilizing manner.

Assembly and commissioning

Assembly and first steps

The BNF-Basic model is largely pre-assembled. The assembly is limited to:

1. Mounting of the supporting surfaces on the hull (plug system with locking screw)
2. Attaching the height control unit
3. Use of the battery and focus test
4. Binding with remote control (spectrum compatible)
5. Programming of flight modes and SAFE settings

The enclosed guide is clearly structured and contains all necessary information. With pictures and step-by-step instructions, the assembly also manages less experienced model builders without problems. The entire assembly time is about 30-45 minutes for initial operation, including programming of remote control.

In later applications, the preparation time is reduced to about 5-10 minutes, since only the main components have to be plugged together and the battery has to be used.

Community support and resources

Help and exchange

An active community has developed around the high-performance model:

• Numerous YouTube channels with flight instructions and tips
• Special forums for e-flite models with focus on the ElectroStreak
• Facebook groups to exchange experiences
• Regular meetings of owners at RC events

These resources provide valuable support to:

• Tuning options for performance enhancement
• Solutions for typical problems
• Flight strategies for different conditions
• Battery recommendations and optimizations

The dedicated community contributes significantly to the success of the model and also enables newcomers to gain easier access to high-speed flight.

Alternative models compared

Competitive products on the test bench

To better assess the positioning of the ElectroStreak, we consider some alternatives:

With its combination of extreme speed and advanced stabilization technology, the ElectroStreak stands out from the competition. While some alternatives can score points in certain areas, hardly any other model in this price class offers such a balanced package of speed, stability and flight characteristics.

The multiplex Solius X, for example, with its significantly greater span of 3.6 meters, is more designed for sliding properties and thus addresses another target group. The Freewing Stinger scores with its Impeller drive and jet optics, but is also more expensive and less beginner-friendly.

Value for money

Value for your money

With a price of about 279 €, the ElectroStreak is positioned in the middle price segment for advanced RC aircraft. Looking at the offered performance and equipment, there is a convincing price-performance ratio:

Positive assessments are:

• Extremely high maximum speed
• High Quality Components (Metal Getriebs-Servos, 45A Smart ESC)
• Advanced technologies (AS3X+, SAFE Select, Telemetry)
• Good spare parts supply
• Versatile (3S and 4S compatible)

To remember there is:

• Battery not included
• Spectrum transmitter required (not included)
• Evtl. additional investment in replacement propeller sensible

Compared to similar powerful models, the Speed-Bolide offers a balanced package of performance, quality and support at a reasonable price. In particular, the integrated stabilization technology, which must be acquired separately in many competitive models, clearly evaluates the overall package.

Tips, tricks and optimizations

Get the maximum out

To get the best out of the high-speed model, experienced pilots have developed numerous optimizations:

Performance upgrade:

• Use of high performance propellers (e.g. APC 8x9E for more speed)
• Optimization of the focus position for better high-speed stability
• Attach small winglets for improved stability at maximum speed
• Flow-optimized spider for lower air resistance

Air safety:

• Programming of dual rate for different flight phases
• Exponential setting of control for more precise handling
• Adaptation of SAFE parameters to your own flight style
• Use of telemetry warnings for critical battery states

Durability:

• Reinforcement of servo connections with thin carbon fiber strips
• Additional backup of battery mounting for high-speed flights
• Reinforcement of the landing frame with more frequent landings on uneven terrain
• Application of protective films at strongly stressed locations

Practical upgrades:

• Installation of an FPV system for immersive flight experience
• Mounting a small action cam for impressive shootings
• Lighter spider for reducing the rotating mass
• Adjustment of the servo arms for optimized rudder deflection

These optimizations are not necessary to enjoy the model, but can further improve the flight experience and optimize performance.

Frequent questions and problem solutions

What users want

Question: Is the ElectroStreak suitable for beginners?Answer: No, the model is primarily designed for advanced pilots due to its high speed and fast responses. Beginners should first gain experience with slower models.

Question: Which transmitter is needed?Answer: The BNF basic model requires a compatible spectrum of DSM2/DSMX transmitters with at least 6 channels. Recommended are transmitters that support telemetry functions in order to fully utilize the ESC's smart functions.

Question: How long does the battery last with full gas?Answer: For permanent full gas, the flight time with a 3S 2200mAh battery is about 5-7 minutes, with a 4S 2200mAh about 4-6 minutes. The flight time can be significantly extended by mixed flight style with sliding phases.

Problem: The model moves upwards at high speedSolution: This is typical of many high-speed models and can be corrected by slight depth trimming or adjustment of the setting angle of the support surface. Some pilots also use small weights in the nose area to easily shift the focus forward.

Problem: Vibrations at high speedSolution: Common causes are unconscious propellers or loose attachments. A careful balancing of the propeller and checking of all screw connections can fix the problem. In the case of sustained vibrations, redirection of the motor may be necessary.

Problem: SAFE system reacts too stronglySolution: The sensitivity of the SAFE system can be adjusted via remote control. A reduction of the gains (reinforcement values) leads to softer reactions. The exact procedure is described in the instructions and varies depending on the transmitter used.

Question: Can I also run the ElectroStreak with 2S or 5S batteries?Answer: The manufacturer expressly recommends only 3S or 4S batteries. 2S batteries provide too little power for attractive flight characteristics, while 5S batteries can overload and damage the drive system.

Conclusion and recommendation for purchase

The E-flite ElectroStreak 1.1m BNF Basic with AS3X+ and SAFE Select (EFL13350) is an impressive high-speed model that convinces with extreme performance, advanced technology and solid processing. With speeds of up to 210 km/h, it offers a flying experience that is in the same price range.

The model is clearly aimed at advanced pilots and speed enthusiasts who are looking for a reliable and powerful RC aircraft. The combination of high-speed capability and AS3X+/SAFE technology makes entry into the world of high-speed flight a bit easier, but does not replace the necessary experience in handling fast models.

For whom the purchase is worth:

• Advanced pilots with experience
• Speed fans looking for a reliable model
• Technology enthusiasts who appreciate modern flight stabilization systems
• Pilots looking for a versatile model for high-speed flight and moderate art flight maneuvers

With a price of about 279 €, the Speed-Bolide offers a fair value for money, especially when you take into account the high-quality equipment and advanced technology. Anyone who is willing to invest in additional accessories such as batteries, charger and possibly a compatible transmitter will receive a model that will provide long pleasure and provide impressive flight performance.