E-flite EC-1500 Twin 1.5m BNF Basic with AS3X and SAFE Select (EFL5750)

Overview and Introduction

The E-flite EC-1500 Twin 1.5m BNF Basic with AS3X and SAFE Select (EFL5750) is a modern foam model for the ambitious RC pilot. This model aircraft is aimed at a diverse target group with a cascading look, impressive technology and high practicality – from advanced beginners to experienced model aircraft. Below you will get a detailed, structured and value-oriented overview of this RC aircraft.

Technical data and facts

Experience reports & Customer reviews

On the EC-1500, many buyers praise the sophisticated flight behaviour and stability – even in windier conditions. The factory-side equipment with the advanced AS3X stabilisation system as well as the SAFE Select mode ensures safe, predictable handling, which will benefit pilots in the learning phase. Users often note that despite two-engine drive, the model is easy to start and land.

The lighting, the functional landing flaps and the freight door controlled by remote control are seen as a highlight. Just the freight gate motivates to creative flight missions, such as throwing small loads or for scale operations. The assembly receives positive feedback: Many report that few handles are needed for commissioning. Completely assembled and painted, even less experienced model builders can start after a short time.

Individual critical voices point out that during frequent transport, the surface area screwing could be a weak point and some would like even more robust wheel suspensions for uneven slopes. The spare parts offer is considered very good by most users.

Overview of test results

In independent tests, the twin model receives best ratings in terms of flight safety, stability and versatility. The control reacts precisely, the model behaves well-natured with basic parameters – advanced users can achieve individual handling through dual rate adjustments (e.g. 100% Expo at cross-ruder, 70% at low speeds). The possibility of using different degrees of difficulty via SAFE Select is often assessed as a convincing advantage in the test.

The drive also convinces in flight: The motorization is designed for dynamic gradients and offers sufficient power to safely execute art flight maneuvers. The freight door works reliably during test operation.

Material quality and processing

The hull, the supporting surfaces and guides are made of high density, lacquered EPO foam. This material selection ensures an optimal ratio of stability to weight. Even after small Remplers, the model is not very susceptible to dents or cracks. The surface is largely insensitive to fuel residues, rain or sunlight.

All movable parts are mounted without play and the linkages are cleanly preassembled on the factory side. Small flaws such as visible spray seams or pressure points are rare, but never completely exclude foam models.

Flight time and flight services

The real flight time depends on the battery used and the flight style. When using a 3S/4S 2200–3200 mAh LiPos, users report on average 7–12 minutes flight time. Gentle Cruise with occasional use of flaps and suspension lengthens flight time; frequent start/country and art flight maneuvers reduce them.

The climbing rate is impressive: The model stands out powerfully, even with full load in the cargo hold. Loopings, rollers and climbing flights are easily possible.

Transportation

A big plus is the modular design: The support surfaces can be quickly removed, which makes transport possible even in smaller vehicles. The low weight and the robust EPO fuselage also facilitate safe transport to the airfield.

Replacement part availability

E-flite enjoys a very good reputation in the spare parts supply. Both national and international traders lead almost all components – from propellers to landing flaps to lighting parts and electronics modules. In case of wear or defect, rapid repair is generally possible without problems.

Target group analysis

The flight model is suitable for advanced starters with first landing and tax experiences as well as for experienced model pilots. If you place value on the combination of scale optics, realistic functionality (e.g. cargo door) and technical innovations, you will find an ideal flight model here.

The EC-1500 twin is also an interesting option for model airlines or flight days – the LED lighting and the freight door offer show potential.

Construction & Guidance

The assembly is essentially limited to the insertion and screwing of support surfaces, height guide and mounting of the chassis. Thanks to the detailed, richly illustrated guide, even less experienced model builders manage to build flott and stress-free. On average, buyers need about 45–60 minutes to first flight.

The manual is well-structured, translations are kept in understandable German, and a troubleshooting part answers the most common questions about focus, servo routes and commissioning.

Community & Support

The user community is active, internationally best networked and regularly exchanges on forums, video portals and social media channels. Many beginners receive support during first steps, such as flight modes, optimizations or repairs. The technical support of Horizon Hobby is considered reliable and quick to reach.

Alternatives and competition products

If you are looking for alternatives, you will find several comparable models from other manufacturers in the RC market:

The EC-1500 twin scores in comparison with features such as LED lighting, freight door and SAFE/AS3X technology. In the scale area, the model stands out due to the authentic design and sophisticated electronics.

Value for money

The set offers a very good value for money. If one takes into account the factory-side assembly quality, the modern stabilization technology and the extensive equipment, the price is justified in comparison to the competition. Especially for pilots who value modern technology and practical suitability, the model is a coherent overall package.

Detailed practical report: tips, recommendations, optimizations

To get the maximum from the EC-1500 twin, there are some proven tips and optimizations from the community:

• Dual Rate/Expo Adaptation: For gentler reactions, it is recommended to adjust the work-side setting of cross-spindles and highspins. If you plan art flight, you can increase sensitivity.
• Focus: For classic round flights, the focus is 65 mm from the leading edge of the wing; Flyers move it to 75 mm.
• Battery positioning: The flight time can be extended by using high-quality 4S-LiPos with high capacity. The total weight and the center of gravity must be taken into account.
• Land flaps: Flights with wind or landings on short lanes can be significantly safer with emotionally used landing flaps.
• Lighting: For night flights or poor visibility, the retrofitting of additional LEDs is recommended. The existing lighting is sufficient in the insulating light.
• Propeller: Keep spare propellers ready, especially for flights on uneven slopes.

What buyers want to know

• Individualization: Many pilots embellish their copy with additional decals or small scale details.
• Simulator training: Anyone who wants to practice before the first flight can virtually control the EC-1500 with spectrum transmitter at the simulator, which shortens the learning curve.
• Accessories: High-quality batteries and chargers are recommended. The freight door is also suitable for creative flight missions, such as parachute jumpers, gliders or candy dumps.
• repairability: Thanks to EPO material, small damage with second glue or PU adhesive can be quickly eliminated.

Typical questions and solutions from the user community

Question: My model goes straight to the right/left. What to do?
Answer: First, check all rows for neutral position and readjust with the trimming of the spark. If necessary, reorientate servo levers and examine model for delay.

Question: The cargo door does not open correctly – what is it?
Answer: Check the cable and connection of the flap, control servo settings and channel allocation at the transmitter. Ensure power supply and free movement of the flap mechanism.

Question: My model tilts over the Bugrad after landing.
Answer: Make landing approach flatter, reduce speed slowly, control center and wheel suspension. If necessary, adjust the wheel axle to the rear.

Question: The assembly takes longer – what can help?
Answer: Edit step by step, sort all parts beforehand, provide matching tool. Community forums offer illustrated tutorials and videos.

Question: How do I recognize the optimal battery position?
Answer: Balance the focus with the battery used (refer to the instructions). For different flight styles readjust (front for quiet flight, back for art flight).

Conclusion

The E-flite EC-1500 Twin 1.5m BNF Basic with AS3X and SAFE Select (EFL5750) sets standards in the field of RC sports aircraft. With day-to-day technology, modern stabilisation and clever features such as landing flaps and freight door, it is interesting for hobby pilots as well as experienced model flyers. The high material quality, good spare parts supply and the strong community complete the overall picture. Thoughtful improvements and individual accessories make this model a rewarding investment for anyone looking for a versatile, technically advanced and durable twin engine model.